- Printed Circuit Board for 108 pcs of 3mm or 5mm LED Module
- OR for 108 pcs of 1206, 1210 smd LEDs
- Circular board shape for cone shape light beam
- High quality board material (FR-4), much longer lasting
- Board thickness 1.6mm for heavy duty LED module under tough situation, for example, in motor vehicles
- Holes available on board for installation and fixation
- Carefully designed LED placement marks on top layer, signs will be under LED after installation, you'll enjoy assembling work and have a clean and tidy Module (check it up in the pictures below)
- 2 different groups of LED with different forward voltages :
Red, Orange, Yellow (ROY) need 1.8V to 2.0V forward voltage
White, Blue, Green, UV (WBGU) need 3.0 to 3.3V forward voltage
- For ROY Group, apply 8VDC, total current for the Module is 540mA, power consumption about 5W
- For WBGU Group, apply 12VDC, total current for the Module is 540mA, power consumption about 7W
- You may like to see Voltage Regulator Kits in this web site as a power supply solution
- If Red LEDs are assembled onto this board, they can be used for car brake light
- Red light is also good for night vision, use flood mode LED for night study, can reduce sore eyes problem
- If Orange LEDs are assembled, the Module can be used as indication light, and to replace short life bulbs
- Wide angle white LED is a good soft light source, as per picture. You may like it in night study
- Spot mode (20 degree view angle) is suitable for light source for distance, but light covering area is smaller
- If you like Infra Red LEDs on the module, use 6V supply. IR LED is having slightly lower forward voltage than ROY group LEDs
- More imagination, blend LED colors with this board, what you need to consider is the forward voltage. Can mix up Red, Orange, Yellow in the board (8VDC supply)
OR
White, Blue, Green, UV, Flashing (12VDC).
A lot of color combination and effect can be done. For example, mix of blue and green gives you very nice ocean green; white and blue gives you icy blue light (maybe a little cool feeling when air conditioner is down). Imagination is unlimited .....
- This board is designed with a schematic of serials of LEDs, each serial is having 4 LEDs. If you can handle forward voltage calculation of LEDs in a serial, how about 3 Red and 1 Blue LED in one serial ? This light source is great for auxiliary light for your in-house plants, especially for flower. You need 9V supply to the module for this concept.
In assembly, make sure you put 3 Red and 1 Blue LED in the serial, you can find this at the copper routing under soldering mask of bottom layer, a bit more eye sore, but worth to play around
- The Boards are Brand new and never used
This is our self developed product. We reserve all copyrights of this item.
- 3 pcs per pack
- All packed inside transparent plastic bag
- USD5.40/pack of 3 boards
- USD2.80 for first pack, USD1.50 for second pack and so on
- optional mail registration USD2.00 per shipment
|
